A Review on Performance Improvement of Vortex Tube
Keywords:
Safety, Vortex tube, Compressed air, Stream, Orifice.Abstract
Now-a-days, the first and foremost important quality of any research or development is its eco-friendly nature. As we know environment safety has become an important aspect of the industries and people in common. Vortex tube is also known as non-conventional cooling device that will produce cold air and hot air when we passed compressed air from compressor without causing any harm to the nature. In vortex tube, when a compressed air from compressor is tangentially passed into vortex chamber vortex tube splits the compressed air into two parts: a free vortex as the peripheral warm stream at the conical valve end and a forced vortex as the inner cold stream through the orifice. It can be used for any type of spot cooling application. [1]
References
[1] Taparia N*, Ritesh Kumar C, Kanwar L and Verma D (2016), Fabrication and Experimental Analysis on L/D Ratio of Vortex Tube, Journal of Applied Mechanical Engineering, Volume 5 • Issue 4• 1000217.
[2] Journal of Thermal Engineering Yildiz Technical University Press, Istanbul, Turkey Vol. 2, Special Issue 4, No. 4, pp. 871-881, July, 2016.
[3] Yilmaz M, Kaya M, Karagoz S, Erdogan S (2009) A review on design criteria for vortex tubes. Heat and Mass Transfer 45: 613-632.
[4] Desai PS (2004) Refrigeration and air conditioning. Khanna Publishers.
[5] Sarath Sasi, Sreejith M (2014) International Journal of Emerging Engineering Research and Technology Volume 2, Issue 6, September 2014, PP 176-186ISSN 2349-4395 ISSN 2349-4409.
[6] R. Madhu Kumar, V. Nageswar Reddy, B. Dinesh Babu (2014) International Journal of Engineering Research ISSN: 2319-6890), 2347 5013 Volume No.3Issue No: Special 1, pp: 48-51.
[7] Design and Manufacturing of Vortex Tube, Pramod Bajarang Vhankade (2015), International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064.
[8] Designing Aspects Of A Vortex Tube Cooling System, Mahesh Kumar Dhangar, Manujendra Sharma, Mangu Singh Chouhan, Proceedings of IRF International Conference, 22nd March-2015, Jaipur, India, ISBN: 978-93-82702-80-1.
[9] Fabrication and analysis of vortex tube Refrigeration system, Krishna Kumar Karothiya, Siddharth Chauhan, International Journal of Innovative Research in Science and Engineering, Vol. No. 2, Issue 08, August 2016.
[10] Upendra Sharan Gupta, Abhishek Chaturvedi, Nishant Patel, Nikhil Kumar Pandey, Naman Patel (2017), International conference on recent innovations in engineering, applied sciences and management, (IETE) Institute ofelectonics and Telecommunication Engineers, New Delhi, India (EAM-17), ISBN: 978-93-86171-64-1.
[11] M. Ramu, A. Sobhanadhri, CH. Naveenkumar (2016), Fabrication and Performance Analysis of a Vortex Tube Refrigeration system, International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 03 Issue: 09 | Sep-2016 www.irjet.netp-ISSN: 2395-0072
[12] Design and Manufacturing of Vortex Tube, Chaitanya M. Joshi, Shivraj K. Jadhav, Pravin D. Patil, Himani B. Kadam (2017), International Journal of Latest Trends in Engineering and Technology Vol. (8) Issue (2), pp.159-165DOI: http://dx.doi.org/10.21172/1.82.024e- ISSN:2278-621X
[13] A.M. Dalavi, Mahesh Jadhav, Yasin Shaikh, Avinash Patil IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE)ISSN(e) : 2278-1684, ISSN(p) : 2320–334X, PP : 45-49
[14] Omkar K. Kubade, Akash R. Maksane, Ketan G. Rajpurohit, Kushal G. Mangire, Amol Gadhave (2016) International Journal for Engineering Applications and Technology SKNSITS_RTME -2016 ISSN: 2321-8134
[15] Hilsch R (1947) The Use of Expansion of Gases in a Centrifugal Field as a Cooling Process. Review of Scientific Instruments 18 (2), 108 - 13.
[16] Pongjet. P & Smith. E (2005), “Investigation on the vortex thermal separation in a vortex tube refrigerator”, Science Asia, 31, 215-223.
Downloads
Published
Issue
Section
Categories
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
Under this license, authors retain ownership of the copyright for their articles. By submitting to the International Journal of Advanced Research in Science, Management, and Technology (IJARSMT), authors grant the journal the right of first publication. Users are free to share, copy, and redistribute the material in any medium or format, and to adapt, remix, transform, and build upon the material for any purpose, including commercially, provided that appropriate credit is given to the original author(s) and the journal, a link to the license is provided, and any changes made are indicated.
